Products
|
CCTV Control & Matrix Equipment |
|
X2150 - Multi-format, Multi-network Control Console
Multi-format desktop console offering centralised control of a wide variety of serial controlled CCTV peripheral equipment - remove the clutter of individual keyboards and controllers, often inherited from previous (or future) upgrades and refits. CCTV systems may be retrofitted with the latest cameras and/or peripherals without regard to the brand or model of existing equipment. |
|
|
UBS2000 - Expandable Matrix System
One of the main advantages of the Telematrix system is the relative ease in which both large and small matrix systems may be conceived and assembled from a selection of only five basic components. The five main components forming the Telematrix are the Enclosure, the CPU Card, the Input Card, the Output Card and the Input Device (keyboards etc). |
|
|
|
CCTV Control & Matrix Equipment - TCP/IP CCTV Equipment - CCTV Test Equipment - Ancillary CCTV Equipment
|
TCP/IP CCTV Equipment |
|
X-Assist X3200 USB CCTV
Joystick Controller
X-Assist is the latest, new generation USB joystick controller from NG Systems, specifically designed to provide maximum independent control of Milestone’s XProtect video management software. |
|
|
PoE/Data Splitter XPS1
The NG Systems PoE/Data Splitter (XPS1) is an installation device which allows PoE power to be delivered to a camera whilst allowing a direct connection to a laptop or other device enabling rapid camera installation/configuration and focusing. |
|
|
Aenigma IP Video Hub
The Aenigma IP Video Hub is a purpose built wall-mounted enclosure housing a powerful video server PC with an independent on-board status monitor that provides auto-start and watchdog facilities. It has been specifically designed as a stand-alone network-based PC that may be accessed only by authorised users and administrators in order to protect it from casual or malicious misuse. |
|
|
X3100 CCTV USB Joystick Controller
The NG Systems X3100 USB joystick controller is designed specifically for IP video surveillance systems and features a sturdy, 3-axis, industry standard joystick and 21 user-defined push buttons ergonomically arranged to suit many video applications. |
|
|
DataBug
DataBug is a serial to Ethernet converter designed to interface RS232 serial devices to a local area network. It may be used, in conjunction with its D9 interceptor, to monitor dataflow between an RS232 source and receiver such as an EPOS (Electronic Point Of Sale) system or cash register and its printer or any other RS232 source. |
|
|
BitNet
BitNet is a 4-bit digital to Ethernet converter that enables up to four, volt-free contact inputs to be transmitted on to a local area network (LAN). Each input is assigned a unique number to identify any contact that has closed or opened. A maximum of 16 BitNets may coexist on the LAN which will facilitate up to 64 volt-free inputs. |
|
|
|
CCTV Control & Matrix Equipment - TCP/IP CCTV Equipment - CCTV Test Equipment - Ancillary CCTV Equipment
|
CCTV Test Equipment |
|
Cable Length Meter CLM1
For use with RG59 (75 Ohms) and RG58 (50 Ohms) or equivalent coaxial cable, this meter provides a direct readout in metres of the length of an un-terminated run of coaxial cable with a resolution of 2-3 metres. A single range of 2.5 to 400 metres on a 4 digit LCD display is provided with automatic indication of open circuit and short circuit conductors. By this means, the location of a short or open circuit in cable runs of up to 800 metres may be found. |
|
|
Video Level Meter VLM1
This meter provides a direct reading in volts of peak white and sync levels of a CCTV signal on a 4 digit LCD display. An input impedance switch provides selection between terminated (75 Ohms) and un-terminated (high impedance) input |
|
|
Focus Indicator FM1
This unit will allow fine adjustment of overall focus of a CCTV camera, especially useful whenever a monitor is not available. It operates by analysing the detail in the centre of the picture and provides a 10 bar LED readout, displaying maximum output when the camera image is in sharpest focus. An input impedance switch provides selection between terminated (75 Ohm) and un-terminated (high impedance) input. |
|
|
Test Card Generator TCG1
This generator provides a standard 75 Ohm 1 volt P to P, PAL encoded CCIR video signal for the testing of monitors and other CCTV equipment.
Four patterns are available |
|
|
Phase Meter PM1
This unit has a 10 bar, LED display to indicate the sync. Phase relationship between two video cameras. It provides a simple method of synchronising the field sync. Of two line locked cameras without the need of a dual-beam oscilloscope. Phase synchronisation is achieved whenever all LEDs are extinguished. A single switch provides selection of 75 Ohms/HiZ termination for both inputs.
|
|
|
VIDEOSTIK Video Sensing Device
Low-cost, battery-operated. Detects the presence of standard 1v p to p video by simply probing the BNC terminated cable. There are no switches or buttons - VideoStik is powered up only when a valid signal is applied. Housed in a sturdy aluminium tubular enclosure with a translucent nylon indicator tip that glows red whenever a video signal is detected. |
|
|
|
CCTV Control & Matrix Equipment - TCP/IP CCTV Equipment - CCTV Test Equipment - Ancillary CCTV Equipment
|
Ancillary CCTV Equipment |
|
Powerbase12 Power Supply Cabinet
The PowerBase 12 provides a professional and efficient way of installing and maintaining low voltage CCTV power by incorporating special design features that facilitate fast, easy installation and maintenance of a variety of power supply modules. |
|
|
Humdinger
A wideband video-isolating transformer (ground loop transformer) used for the reduction of longitudinal mains induced hum. For high-resolution video signals and 'down the cable' telemetry it is essential that all components in the signal path are of sufficient bandwidth to pass the full frequency range of both signals with minimal distortion. |
|
|
RS232 - RS422/485 Converters
A cost-effective solution for converting simplex serial data between these two popular formats. |
|
|
Add-On Autopan Board
An add-on board that provides an autopan function to any AC, fixed speed P/T head fitted with limit switches. It functions by monitoring the current flow to the panning motor and selecting the alternate motor whenever the current ceases (i.e. limit switch is activated). This facilitates simpler wiring to the panning head without the need for additional switches or other components to be fitted to the head. |
|
|
|